400 Aluminum Water Breaker® Nozzle

The original full-flow shower head nozzle. Dramm's aluminum 400 Water Breaker provides fast, full-flow watering without damage to your plants or disturbing soil. Used and recommended daily by professional growers worldwide. Cast aluminum and hand machined with 3/4 inch brass hose threads. Invented, designed and manufactured in the U.S.A. since 1945.

170 Aluminum Water Breaker® Nozzle

The 170AL Water Breaker is excellent for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets), and when using fertilizer syphons. Adjust water flow to 50% of its possible volume. Cast aluminum with 3/4 brass hose threads. Manufactured in the U.S.A.

400PL Water Breaker® Nozzle with Protective Ring

The 400PL With Protective Ring returns to our familiar Blue color but with the additon of our black protective ring. This ring prevents damage by absorbing and transferring blows around the disk.

400PL Water Breaker® Nozzle

The 400PL Water Breaker provides fast, full-flow watering without damage to your plants. Patterned after the original 400 Aluminum water breaker , the 400PL is made from high-impact ABS plastic and aluminum to provide a lightweight alternative. Used by professional growers worldwide. Made in U.S.A. 3/4 hose threads.

170PL Water Breaker® Nozzle

Patterned after the 170 Aluminum water breaker, the 170PL is an excellent choice for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets). Adjust water flow to 50% of its possible volume. Made in the U.S.A. from ABS plastic. 3/4 hose threads.

480PL Plastic Fine Water Breaker® Nozzle

480 Plastic Water Breaker. Stainless steel disk. Micro-fine holes. Focused Pattern.

480AL Aluminum Fine Water Breaker® Nozzle

480 Aluminum Water Breaker. Stainless steel disk. Micro-fine holes. Wider pattern.

Screen-Aire Water Breaker® Nozzle

The Screen-Aire Water Breaker is designed to water nursery containers with a gentle, concentrated aerated flow of water. A fine-mesh screen and an array of internal components combine air and water to produce a very soft, unrestricted spray. Use a Dramm In-Line Hose Filter to keep the nozzle from clogging. Made in the U.S.A. 3/4 brass threads.

1000PL Water Breaker® Nozzle

The 1000PL Redhead water breaker has over 1,000 micro holes that create an ultra-soft flower shower which will not disturb delicate soil or harm tender plants. Use with a Dramm In-Line Hose Filter to prevent clogging. Made in U.S.A. from ABS plastic and stainless steel.

750PL Fine Low Flow Water Breaker® Nozzle

The 750PL Water Breaker has 750 micro-holes for a fine pattern with a slightly reduced flow rate. The 750PL is perfect for light watering with a very soft pattern. Wider pattern.

175 micron In-Line Hose Filter

The Dramm In-Line Hose Filter is for use with any Dramm hose nozzle, but highly recommended for the 1000PL Water Breaker and the 350AL Screen Aire. A stainless steel 175 micron (80 mesh) screen filters out unwanted dirt and debris.

In-Line Wand Filter Element

175 micron element for the ILF-175.

Brass Hose Swivel

The Brass Hose Swivel is a live swivel that allows for unencumbered movement between the hose and attachements under pressure. Reduces hose twisting.

Brass Rose - 4 Diameter

Our Brass Rose features an extra wide spray pattern, which allows you to increase the speed of hand watering. Available in a 4-inch diameter. Great for watering bedding plants, pots or market packs. 540B includes protective rubber guard and metric to inch hose thread converter. Made in Germany with 3/4 hose threads.

Plastic Fan Nozzle

The Dramm Plastic Fan Nozzle offers a medium flow in a rectangular pattern. Perfect for flats and plug trays.

Seedling Nozzle

The Seedling Nozzle allows you to water fragile plants, delicate seedlings or plant cuttings. This high-quality nozzle produces an extra fine, hollow cone mist pattern and sprays 1/2 gallon of water per minute. Made in the U.S.A. from solid brass. 3/4 hose threads.

Fogg-It Nozzle - Super Super Fine

The Fogg-It Nozzle is designed for misting delicate seedlings or for raising humidity around wilting plants. This nozzle has three mist jets which create a conical spray pattern. Available in 4 different discharge rates. Made in the U.S.A. from solid brass. 3/4 hose threads. Available in 4 different flow rate sizes.

Fogg-It Nozzle - Super Fine

Adjustable Hose Nozzle

Our Adjustable Hose Nozzle is great for cleaning walkways, benches, equipment... just about anything! Twist the barrel to adjust the water pattern from a fine, cone-shaped spray to a powerful stream. Twist the barrel back and the water is off. Manufactured in the U.S.A. from brass. 3/4 hose threads.

Syphonject™

Syphonject - plastic siphon mixer. Our 20:1 ratio feeder syphons solution using a pressure drop created by the passing stream of water. The Syphonject is made from glass filled polypropylene and is very durable as well as corrosion resistant. An external check valve ensures that water does not fill the solution source and is easy to replace. The Syphonject is perfect for fertilizing and cleaning.

Handi-Grip™ Handle

The Handi-Grip Handle provides comfort when watering directly from your hose. It is also perfect for using with the Brass Rose or any of the Dramm Water Breakers. The six inch long grip is encased in a padded foam grip. Made in the U.S.A. from aluminum and brass. 3/4 male and female hose threads.

Handi-Reach™ Handle

Handi-Reach Handles are designed to eliminate the stretching and stooping associated with hand watering. Available in 16, 24, 30, 36, 48, 60 and 72-inch lengths, these rugged tools allow you to water hard-to-reach areas with ease. Made in the U.S.A. from extruded aluminum tubing, forged brass hose couplings and a comfort EPDM hand grip. 3/4 male and female hose threads.

36 Hanging Basket Handle

Hanging Basket Handles offer a 90_ curve in the top of handle so you can water directly into a hanging basket. Available in 36 and 48-inch lengths, Use with any 170 series Water Breaker to water hanging baskets and window boxes. Made in the U.S.A. from extruded aluminum tubing, forged brass hose couplings and a comfort EPDM hand grip. 3/4 male & female hose threads.

48 Hanging Basket Handle

Handi-Reach™ Color Handle

Upgrade to our colorized Handi-Reach Handles. These are the same heavy-duty extension handles as noted above, except they have a super comfortable foam hand grip and come in the color of your choice. Six bright colors are available in 16, 24 or 30-inch lengths. Choose from Red (RD), Orange (OR), Yellow (YL), Green (GN), Blue (BL) or Berry (BY)

24 Handi-Reach™ Handle

Hose Protector

The Hose Protector saves hose ends from unnecessary stress and strain. Utilizing a spring wound around a short length of hose, the Hose Protector connects between the faucet and your hose to prevent hose-end kinking and damage to hose couplings. This handy tool is made from zinc plated steel and heavy-duty, nickel plated brass. The Hose Protector has a 5/8 inch inside diameter. 3/4 inch male & female hose threads.

Hose Extender

The Hose Extender is a flexible 24 extension of your hose which can be used with any Dramm water tool. Great for hand watering! Just place our Brass Shut-Off on one end and a 400 Water Breaker on the other. Made in the U.S.A. from reinforced synthetic rubber and heavy-duty brass 3/4 connections. 5/8 inside diameter.

Brass Twisty Quick 5/8

The 625 and 675 Twisty Quick are 1/4 turn quick disconnects with hose barb fittings for use with blunt cut hoses. Secure hose to the fitting with a hose clamp (not provided). Can be used in any combination with 775M and 775F Twisty Quick. Made in Germany from forged brass. Order item 625 for 5/8 ID hose or item 675 for 3/4 ID hose.

Brass Twisty Quick 3/4

Threaded Brass Twisty Quick - Male

The 775M & 775F Twisty Quick are 1/4 turn Quick Disconnects. Makes any threaded hose connection easy to couple/uncouple. Can be used in any combination with 625 & 675 Twisty Quick. Made in Germany from forged brass. 775M - 3/4 male hose thread, 775F - 3/4 female hose thread.

Threaded Brass Twisty Quick - Female

Twisty Quick

Twisty Quick-- plastic quick connect hose adapter. Full water flow design. Our patended design is made from heavy-duty plastic. 3/4 male and female hose threads. Sold as a pair only.

Brass Quick Disconnect

The 740 Brass quick connects offer full flow without water-stop. Made in the USA.

QAV Shut-Off Valve

The QAV Valve is designed as a high-quality, lower-cost valve. Made in the USA, the QAV uses a unique, patent-pending design to improve strengh and quality while reducing assembly labor.

Twin Shut-Off Valve

Water two places at one time with the 235 Twin Shut-Off Valve! Connect the valve to your faucet to create two male connections-- with each connection independently controlled. A quarter turn of the handle and the water flow is shut off. Molded from high quality ABS plastic. 3/4 male and female hose threads.

Brass Twin Shut-Off Valve

Water two places at one time with the 235 Brass Twin Shut-Off Valve! Connect the valve to your faucet to create two male connections-- with each connection independently controlled. A quarter turn of the handle and the water flow is shut off. Cast brass with a female swivel for easy attachment.

Heavy Duty Plastic Shut-Off Valve

The 74 Shut-off valve is made from glass fille polypropylene to be very durable and corrosion resistant. More durable than other plastic valves, the 74 is lightweight and offers a full flow.

300 Brass Shut-Off Valve

Simply the best shut-off valve available. Dramm's #300 Brass Shut-Off Valve provides fingertip water control at the end of your greenhouse hose. A quarter turn of the large ergonomic handle and the water is off. Full water flow design. Made in the USA from brass, durable seals and a hard chrome plated ball to provide years of service. 3/4 threads.

300 Brass Shut-Off Valve w Raised Handle

Our durable Brass Shut Off but with a raised handle so that it can clear obstructions such as the brass Twisty Quick

300 Handle Repair Kit

The Handle repair kit replaces the forged handle only.

300 Full Repair Kit

The Full repair kit replaces all internal components and the handle.

Aluminum Shut-Off Valve

The 300AL is exactly the same as the 300 Brass, but made from machined aluminum. Lighter weight that its cousin, it is just as durable. Depending on water quality and other fittings used, corrosion may result.

Touch N' Flow Pro™

The 65 Touch N'Flow Pro Trigger Valve offers durability and high flow in a trigger valve. With 11 gpm output and a long life, the 65 TNF Pro allows for flexibility when watering.

2 Liter Watering Can

The unique spout design and excellent balance make this watering can perfect for indoor use. Houseplant watering is easy with the far reaching spout. Two liter (1/2 gallon) capacity. Complete with a detachable plastic rose. Made from high-grade, durable plastic in red, yellow, green, and blue. Made in USA.

5 Liter Watering Can

Our 5 liter watering can features an extra long spout with a brass rose. The rain-like water pattern arches upward and softly falls upon plants. This gentle sprinkle is unequaled for applying fertilizer to foliage. Detachable brass rose included. Available in red, yellow, green, and blue. 1 1/3 gallon capacity. Made in USA.

7 Liter Watering Can

Designed for and used by professional growers for over 100 years. Now manufactured from 1/8 injection molded plastic so they won't rust, leak or corrode. Available in red, yellow, green, and blue. Perfectly balanced for indoor and outdoor use. Comes standard with large plastic rose. 1 3/4 gallon capacity.

10 Liter Watering Can

Our largest watering can holds over 2 gallons and is engineered for years of use. A detachable angle spout ensures that your plants receive water where you want it. Perfect for Interior Plantscape professionals. Roses sold seperately. Available in red and green. 2 1/2 gallon capacity. Made in Switzerland

2 Liter Replacement Rose

Replacement roses and elbows for Dramm Watering Cans. Specify color code when ordering: Red (RD), Yellow (YL), Green (GN), Blue (BL)

5 Liter Replacement Rose

ColorStorm™ Professional Rubber Hose

ColorStorm™ Hose 5/8 in 50 ft

Nickel Plated, Machined Brass Hose Fittings for ColorStorm™ Hose

Male 5/8 Nickel Plated Brass Fitting

Female 5/8 Nickel Plated Brass Fitting

Male 3/4 Nickel Plated Brass Fitting

Female 3/4 Nickel Plated Brass Fitting

5/8 Ferrule - brass

3/4 Ferrule - brass

DrammPress Frame

The DrammPress fits Dramm ColorStorm hose with our professional fittings by hand or using a cordless drill. The Dramm Crimper can be fitted with either 5/8 or 3/4 jaws (sold separately). Works with all Dramm ColorStorm fittings and ferrules.

DrammPress 5/8 Jaws

Choose either jaw size to fit Dramm ColorStorm hoses. Either jaw fits the DrammPress (sold separately).

How to use the DrammPress

Fitting/Ferrule Set 5/8 in Male 12 pk

Fitting and Ferrule set for use with the DrammPress Hose Crimper and ColorStorm Hose

Fitting/Ferrule Set 5/8 in Female 12 pk

Fitting/Ferrule Set 3/4 in Male 12 pk

Fitting/Ferrule Set 3/4 in Female 12 pk

Splice/Ferrule Set 5/8 in 12 pk

One Touch™ Valve

The One Touch Valve offers thumb-tip control of your water flow. With 8 gpm output and a long life, the OneTouch Valve offers flexibility when watering.

OneTouch™ HighFlow Valve

The OneTouch HighFlow valve offers the same, fingertip control of your watering, but with up to 16 gpm.