- Home
- Commercial Equipment
- Watering Tools & Hose
- Irrigation Systems
- Sprayers, Foggers, Foamers
- HAF Fans & Thermostats
- Humidity Management
- Specialized Tools
- Livestock Products
- Interiorscape
- Sanitation
- Battery Watering Cart
- Frost Protection
- Dramm YouTube Page
- DRAMMwater
- --
- Learning
- Warranty Registration
- Equipment Service & Repair
- Dramm Forum
- Dramm Blog
- Consumer Products
- Drammatic Organic Fertilizer
- News
- Contact
- Careers
- Privacy Policy
- Sustainability at Dramm
DrammPress Hose Crimper
Fit Your Own Hose
The DrammPress Hose Crimper fits Dramm approved fittings and ferrules onto Dramm ColorStormTM hose as securely as the equipment we use in our shop.
The DrammPress is available with either 5/8" or 3/4" interchangeable jaws. The jaws and frame are sold separately.
Both 5/8" and 3/4" ColorStorm hose is sold in 300' rolls and Dramm ferrules and fittings are sold in case packs for use with the DrammPress.
To use the DrammPress:
1. Cut hose cleanly.
2. Insert ferrule over the hose end.
3. Insert barbed end of fitting into hose through opening in ferrule. Some glass cleaner sprayed on the barb may ease this insertion.
4. Press end of fitting against a hard, flat surface to insert fully.
5. Insert this end into the DrammPress with the jaws fully open.
6. Align the end of the ferrule with the end of the press frame as shown.
7. Tighten the jaws with the included allen wrench or using a cordless drill with the included bit until the jaws meet completely.
8. Open the jaws completely and remove the end.
DrammPress Frame
The DrammPress fits Dramm ColorStorm hose with our professional fittings by hand or using a cordless drill. The Dramm Crimper can be fitted with either 5/8 or 3/4 jaws (sold separately). Works with all Dramm ColorStorm fittings and ferrules.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| DP-FRAME | - | DrammPress Frame | BROCHURE | - | - |
DrammPress 5/8 Jaws
Choose either jaw size to fit Dramm ColorStorm hoses. Either jaw fits the DrammPress (sold separately).
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| DP-J625 | 5/8 in | DrammPress 5/8 Jaws | - | - | - |
| DP-J750 | 3/4 in | DrammPress 3/4 Jaws | - | - | - |
Fitting/Ferrule Set 5/8 in Male 12 pk
Fitting and Ferrule set for use with the DrammPress Hose Crimper and ColorStorm Hose
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17810 | 5/8 in | Fitting/Ferrule Set 5/8 in Male 12 pk | - | - | 2 lbs |
Fitting/Ferrule Set 5/8 in Female 12 pk
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17815 | 5/8 in | Fitting/Ferrule Set 5/8 in Female 12 pk | - | - | 2 lbs |
Fitting/Ferrule Set 3/4 in Male 12 pk
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17820 | 3/4 in | Fitting/Ferrule Set 3/4 in Male 12 pk | - | - | 2 lbs |
Fitting/Ferrule Set 3/4 in Female 12 pk
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17825 | 3/4 in | Fitting/Ferrule Set 3/4 in Female 12 pk | - | - | 2 lbs |
Splice/Ferrule Set 5/8 in 12 pk
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17830 | 5/8 in | Splice/Ferrule Set 5/8 in 12 pk | - | - | 2 lbs |
| 10-17840 | 3/4 in | Splice/Ferrule Set 3/4 in 12 pk | - | - | 2 lbs |
DrammPress Hose Crimper
Fit Your Own Hose
The DrammPress Hose Crimper fits Dramm approved fittings and ferrules onto Dramm ColorStormTM hose as securely as the equipment we use in our shop.
The DrammPress is available with either 5/8" or 3/4" interchangeable jaws. The jaws and frame are sold separately.
Both 5/8" and 3/4" ColorStorm hose is sold in 300' rolls and Dramm ferrules and fittings are sold in case packs for use with the DrammPress.
To use the DrammPress:
1. Cut hose cleanly.
2. Insert ferrule over the hose end.
3. Insert barbed end of fitting into hose through opening in ferrule. Some glass cleaner sprayed on the barb may ease this insertion.
4. Press end of fitting against a hard, flat surface to insert fully.
5. Insert this end into the DrammPress with the jaws fully open.
6. Align the end of the ferrule with the end of the press frame as shown.
7. Tighten the jaws with the included allen wrench or using a cordless drill with the included bit until the jaws meet completely.
8. Open the jaws completely and remove the end.
DrammPress Frame
The DrammPress fits Dramm ColorStorm hose with our professional fittings by hand or using a cordless drill. The Dramm Crimper can be fitted with either 5/8 or 3/4 jaws (sold separately). Works with all Dramm ColorStorm fittings and ferrules.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| DP-FRAME | - | DrammPress Frame | BROCHURE | - | - |
DrammPress 5/8 Jaws
Choose either jaw size to fit Dramm ColorStorm hoses. Either jaw fits the DrammPress (sold separately).
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| DP-J625 | 5/8 in | DrammPress 5/8 Jaws | - | - | - |
| DP-J750 | 3/4 in | DrammPress 3/4 Jaws | - | - | - |
Fitting/Ferrule Set 5/8 in Male 12 pk
Fitting and Ferrule set for use with the DrammPress Hose Crimper and ColorStorm Hose
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17810 | 5/8 in | Fitting/Ferrule Set 5/8 in Male 12 pk | - | - | 2 lbs |
Fitting/Ferrule Set 5/8 in Female 12 pk
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17815 | 5/8 in | Fitting/Ferrule Set 5/8 in Female 12 pk | - | - | 2 lbs |
Fitting/Ferrule Set 3/4 in Male 12 pk
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17820 | 3/4 in | Fitting/Ferrule Set 3/4 in Male 12 pk | - | - | 2 lbs |
Fitting/Ferrule Set 3/4 in Female 12 pk
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17825 | 3/4 in | Fitting/Ferrule Set 3/4 in Female 12 pk | - | - | 2 lbs |
Splice/Ferrule Set 5/8 in 12 pk
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| 10-17830 | 5/8 in | Splice/Ferrule Set 5/8 in 12 pk | - | - | 2 lbs |
| 10-17840 | 3/4 in | Splice/Ferrule Set 3/4 in 12 pk | - | - | 2 lbs |
Specialized Watering Tools for Every Need
Leaky Wand? Check Your Washers
Save Labor by Speeding Up Your Hand Watering
Retail Irrigation Upgrades to Reduce Labor and Improve Plant Health
Irrigation Upgrades to Reduce Labor and Improve Plant Quality
Latest forum topics:
Copyright © 2024 Dramm Corporation. All rights reserved.