- Home
- Commercial Equipment
- Watering Tools & Hose
- Irrigation Systems
- Sprayers, Foggers, Foamers
- HAF Fans & Thermostats
- Humidity Management
- Specialized Tools
- Livestock Products
- Interiorscape
- Sanitation
- Battery Watering Cart
- Frost Protection
- Dramm YouTube Page
- DRAMMwater
- --
- Learning
- Warranty Registration
- Equipment Service & Repair
- Dramm Forum
- Dramm Blog
- Consumer Products
- News
- Contact
- Careers
- Privacy Policy
- Sustainability at Dramm
Autofog Automatic Chemical Application
Fog Automatically
The Dramm Autofog automatically sprays areas up to 70,000 square feet with no applicator present. The ultra-fine cloud of droplets penetrates deep into the plant canopy covering all surfaces, ensuring excellent control of greenhouse pests and diseases.
The Autofog saves time and money by eliminating the labor needed to spray while reducing the amount of chemical needed to control your pests. By creating billions of tiny spray droplets, the Autofog treats large areas with less chemical solution.
Just set the timer, mix the chemical and leave. The Autofog does the rest. The next morning, ventilate the greenhouse and clean up the Autofog.
* Sizing may be reduced based on crop height, greenhouse height, crop type and solution volumes required. Biorational products or other less-soluble chemicals may require more water and cover less area. Discuss your situation with a Dramm specialist to ensure proper sizing.
Each Autofog can spray greenhouses up to a certain size by themselves. For larger areas, the Autofog works with the AME Horizontal Air Flow Fans to evenly distribute the chemical solution.
The Autofog is available as a complete unit, including compressor, or may be mounted in the greenhouse with your own air-source.
For corrosive chemicals, a stainless-steel option is available to prevent damage to the nozzle.
Cleaning your Autofog
Keeping your Autofog clean will help it run well for years.
This video shows the basics.
Setting the Autofog Timer
Programing your Autofog timer is easy. After setting the clock to the correct time, and remembering it is set in military time, flip out all the pins for the complete time to be fogged. Each pin represents 15 minutes. Ensure that the switch is in the A
MLVH Suction Line and Filter Position
To ensure that your MiniAutofog fogs properly and does not clog or stop spraying during application, make sure that the filter on the suction tube is properly positioned. Improper positioning or not using the filter can cause the suction tubeto siphon to
Autofog Annual Maintenance Kit Installation
To keep your Autofog running properly, Dramm recommends servicing annually with our Annual Maintenance Kit.
This kit consists of a number of parts that should be replaced annually.
This video shows how to replace the nozzle components.
Autofog in use in an ornamental greenhouse
Demonstration of the Autofog in an ornamental greenhouse.
Autofog Instructional Video
An unscripted video showing the use and care of an Autofog.
Autofog in use in a vegetable greenhouse
Video showing several Autofog LVH fogger heads mounted in a vegetable greenhouse, automatically applying pesticide.
Technical Questions? Check out our forum.
Mini AutoFog™
Treats up to 5,000 sq ft alone or up to 7,000 sq ft with HAF fans. Perfect for individual greenhouses, quonset huts and smaller areas. More than one can be used together for larger areas and separated for smaller areas.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| MLVH-10A | 120 volt | Mini AutoFog™ | BROCHURE | MANUAL | 83 lbs |
Autofog™
Treats 12,000 square feet . Treats 26,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use
.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| SLVH-20A | 120 volt | Autofog™ | BROCHURE | MANUAL | 156 lbs |
Large AutoFog™
Treats 30,000 square feet. Treats 70,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use. 240 Volts 60HZ, single phase
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| LVH-20A | 220 volt | Large AutoFog™ | BROCHURE | MANUAL | 187 lbs |
Air Kit for SLVH and LVH
The Autofog AirKit is used to connect a fogger head to a customer supplied air compressor and includes a 24v solenoid, an air filte and regulator. The AirKit allows a user to mount their fogger head permanently in the greenhouse. Requires separate control, such as a a climate control computer.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| AF-AIRKIT | 120 or 220 volt | Air Kit for SLVH and LVH | BROCHURE | MANUAL | 15 lbs |
Stainless Steel Nozzle for MLVH and SLVH Autofog
For the application of corrosive chemicals with the Autofog. Replaces the standard brass nozzle. Available for all Autofog sizes.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| J753A2 | 45 ml/min | Stainless Steel Nozzle for MLVH and SLVH Autofog | - | - | 1.2 lbs |
Stainless Steel Nozzle for LVH and DLVH Autofog
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| J754B2 | 55 ml/min | Stainless Steel Nozzle for LVH and DLVH Autofog | - | - | 1.2 lbs |
Autofog Annual Maintenance Kit
The Autofog Annual Maintenance Kit includes a collection of components that should be replaced on the Autofog units annually. The kit includes O-Rings and a replacement solution line for the nozzle, an air filter for the compressor and easy to use instructions on how to replace each part as well as calibrate your Autofog nozzle for the next season. Please specify the model when ordering. (ML, SL or LV)
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| AF-AMK- _ _ | Specifiy Unit Size | Autofog Annual Maintenance Kit | - | MANUAL | 0.8 lbs |
Autofog Automatic Chemical Application
Fog Automatically
The Dramm Autofog automatically sprays areas up to 70,000 square feet with no applicator present. The ultra-fine cloud of droplets penetrates deep into the plant canopy covering all surfaces, ensuring excellent control of greenhouse pests and diseases.
The Autofog saves time and money by eliminating the labor needed to spray while reducing the amount of chemical needed to control your pests. By creating billions of tiny spray droplets, the Autofog treats large areas with less chemical solution.
Just set the timer, mix the chemical and leave. The Autofog does the rest. The next morning, ventilate the greenhouse and clean up the Autofog.
* Sizing may be reduced based on crop height, greenhouse height, crop type and solution volumes required. Biorational products or other less-soluble chemicals may require more water and cover less area. Discuss your situation with a Dramm specialist to ensure proper sizing.
Each Autofog can spray greenhouses up to a certain size by themselves. For larger areas, the Autofog works with the AME Horizontal Air Flow Fans to evenly distribute the chemical solution.
The Autofog is available as a complete unit, including compressor, or may be mounted in the greenhouse with your own air-source.
For corrosive chemicals, a stainless-steel option is available to prevent damage to the nozzle.
Cleaning your Autofog
Keeping your Autofog clean will help it run well for years.
This video shows the basics.
Setting the Autofog Timer
Programing your Autofog timer is easy. After setting the clock to the correct time, and remembering it is set in military time, flip out all the pins for the complete time to be fogged. Each pin represents 15 minutes. Ensure that the switch is in the A
MLVH Suction Line and Filter Position
To ensure that your MiniAutofog fogs properly and does not clog or stop spraying during application, make sure that the filter on the suction tube is properly positioned. Improper positioning or not using the filter can cause the suction tubeto siphon to
Autofog Annual Maintenance Kit Installation
To keep your Autofog running properly, Dramm recommends servicing annually with our Annual Maintenance Kit.
This kit consists of a number of parts that should be replaced annually.
This video shows how to replace the nozzle components.
Autofog in use in an ornamental greenhouse
Demonstration of the Autofog in an ornamental greenhouse.
Autofog Instructional Video
An unscripted video showing the use and care of an Autofog.
Autofog in use in a vegetable greenhouse
Video showing several Autofog LVH fogger heads mounted in a vegetable greenhouse, automatically applying pesticide.
Cleaning your Autofog
Keeping your Autofog clean will help it run well for years.
This video shows the basics.
Setting the Autofog Timer
Programing your Autofog timer is easy. After setting the clock to the correct time, and remembering it is set in military time, flip out all the pins for the complete time to be fogged. Each pin represents 15 minutes. Ensure that the switch is in the A
MLVH Suction Line and Filter Position
To ensure that your MiniAutofog fogs properly and does not clog or stop spraying during application, make sure that the filter on the suction tube is properly positioned. Improper positioning or not using the filter can cause the suction tubeto siphon to
Autofog Annual Maintenance Kit Installation
To keep your Autofog running properly, Dramm recommends servicing annually with our Annual Maintenance Kit.
This kit consists of a number of parts that should be replaced annually.
This video shows how to replace the nozzle components.
Autofog in use in an ornamental greenhouse
Demonstration of the Autofog in an ornamental greenhouse.
Autofog Instructional Video
An unscripted video showing the use and care of an Autofog.
Autofog in use in a vegetable greenhouse
Video showing several Autofog LVH fogger heads mounted in a vegetable greenhouse, automatically applying pesticide.
Technical Questions? Check out our forum.
Mini AutoFog™
Treats up to 5,000 sq ft alone or up to 7,000 sq ft with HAF fans. Perfect for individual greenhouses, quonset huts and smaller areas. More than one can be used together for larger areas and separated for smaller areas.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| MLVH-10A | 120 volt | Mini AutoFog™ | BROCHURE | MANUAL | 83 lbs |
Autofog™
Treats 12,000 square feet . Treats 26,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use
.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| SLVH-20A | 120 volt | Autofog™ | BROCHURE | MANUAL | 156 lbs |
Large AutoFog™
Treats 30,000 square feet. Treats 70,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use. 240 Volts 60HZ, single phase
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| LVH-20A | 220 volt | Large AutoFog™ | BROCHURE | MANUAL | 187 lbs |
Air Kit for SLVH and LVH
The Autofog AirKit is used to connect a fogger head to a customer supplied air compressor and includes a 24v solenoid, an air filte and regulator. The AirKit allows a user to mount their fogger head permanently in the greenhouse. Requires separate control, such as a a climate control computer.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| AF-AIRKIT | 120 or 220 volt | Air Kit for SLVH and LVH | BROCHURE | MANUAL | 15 lbs |
Stainless Steel Nozzle for MLVH and SLVH Autofog
For the application of corrosive chemicals with the Autofog. Replaces the standard brass nozzle. Available for all Autofog sizes.
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| J753A2 | 45 ml/min | Stainless Steel Nozzle for MLVH and SLVH Autofog | - | - | 1.2 lbs |
Stainless Steel Nozzle for LVH and DLVH Autofog
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| J754B2 | 55 ml/min | Stainless Steel Nozzle for LVH and DLVH Autofog | - | - | 1.2 lbs |
Autofog Annual Maintenance Kit
The Autofog Annual Maintenance Kit includes a collection of components that should be replaced on the Autofog units annually. The kit includes O-Rings and a replacement solution line for the nozzle, an air filter for the compressor and easy to use instructions on how to replace each part as well as calibrate your Autofog nozzle for the next season. Please specify the model when ordering. (ML, SL or LV)
| ITEM | SIZE | NAME | BROCHURE | MANUAL | SHIP WT. |
| AF-AMK- _ _ | Specifiy Unit Size | Autofog Annual Maintenance Kit | - | MANUAL | 0.8 lbs |
PulsFOG vs. Autofog: Why Both Might be Your Best Choice When Choosing a Fogger
Fogging Calcium for Poinsettia Bract Edge Burn"
Applying Biopesticides? Considerations for Best Application
The Basics of Fogging for Plant Protection
How the Right Hose Reel Can Improve Your Sprays
Latest forum topics:
close X
Download here:
Not sure what type of sprayer you need?
Download our white paper "Selecting the Right Sprayer" to learn the right questions to ask."
Copyright © 2025 Dramm Corporation. All rights reserved.